July 20, 2020

Warm edge spacer system for structural glazing and XXL glass panes

Edgetech launches Super Spacer® T-Spacer™ SG
Heinsberg, July 2020. Edgetech/Quanex presents the further development of  Super Spacer® T-Spacer™ Premium Plus in the form of Super Spacer® T-Spacer™ SG. The product was developed for structural glazing and XXL glass panes in order to optimise the durability properties of the edge seal. Here the typical T-shape of the warm edge spacer has been specially adapted to the requirements of automated insulating glass lines for large formats.
Structural Glazing is here to stay. Thanks to its excellent performance in terms of thermal insulation and life cycle costs, the elegant, translucent facade designs are a growing trend where sustainable building is concerned. Every change, no matter how small, which contributes towards an improvement in the quality and durability of a glass facade is therefore welcome in the field of glass construction.
The primary seal is of particular importance in structural glazing due to the fact the UV-resistant silicone secondary sealants are gas permeable. The primary sealant - usually polyisobutylene - extruded onto the sides of the spacer and bonded to the inside of the glass pane bears the main load of keeping the edge seal gas-tight throughout and preventing vapour diffusion into the space between the panes. "We wanted to take this into account and have developed our new special product for structural glazing and XXL glass panes in close cooperation with a leading manufacturer of insulating glass panes for commercial buildings," states Joachim Stoss, Managing Director of Edgetech Europe GmbH and Vice President of International Sales at Quanex.
The outer dimensions remain unchanged compared to Super Spacer® T-Spacer™ Premium Plus, but the manufacturer increased the lateral areas in order to apply the polyisobutylene. The new spacer design also assists the application to be precise right down to the last millimetre of the spacer before the secondary seal is applied on the automated insulating glass line. " This means that the parallelism and low tolerances of the spacers in large multi-pane insulating glass units are even more precise and the robustness of the system is further increased. This is particularly important where high pane dimensions and pane weights are involved, alongside the expected long service life of facade elements," adds Christoph Rubel, European Technical Manager at Edgetech Europe GmbH.
As with all products manufactured by Edgetech, Super Spacer® T-Spacer™ SG is a metal-free, silicone-based warm edge spacer made of structural foam with an integrated desiccant. It also offers excellent thermal insulation properties by virtue of its low thermal conductivity of 0.19 W/mK. The spacer’s composition offers enhanced shape memory which is very important for the long-term integrity of the edge compound. The elastic structural foam follows the climate-related movements of the glass, relieving a large proportion of the load from the butyl seal. This represents an invaluable advantage especially in climate zones with very low, very high or strongly fluctuating temperatures.

(Caption) Super Spacer® T-Spacer™ SG, the new spacer for structural glazing and XXL glass panes, has larger surfaces for the application of the primary seal.


About Edgetech Europe GmbH
Edgetech’s Super Spacer® flexible foam-based spacer systems acts as energy-efficient warm edge spacers in insulating glass windows. They significantly reduce energy loss to the outside, largely prevent condensation and also contribute to the lifetime of a window. On average, worldwide, more than 300 million metres are sold annually in over 90 countries.
Edgetech Europe GmbH, located in Heinsberg Germany, is a fully-owned subsidiary of Quanex Building Products Corporation, an industry-leading manufacturer of components sold to Original Equipment Manufacturers (OEMs) in the building products industry. Quanex designs and produces energy-efficient fenestration products in addition to kitchen and bath cabinet components, with its head offices in Houston, Texas. Based on turnover Edgetech/Quanex is the world‘s largest manufacturer of spacers. Edgetech Europe GmbH is a sales location for the markets in continental Europe and one of the three worldwide Edgetech production plants, with a total of 450 employees and 16 extruders. You can obtain additional information about the Super Spacer® systems and the Warm Edge Technology of Edgetech here: www.superspacer.com.
Press Agency
Interview International
Ingrid Hecht
15, rue Martin Luther
67000 Strasbourg, France
Tel.: +33 (0)3 88 15 55 88
Email: info@interview-international.fr
Edgetech Europe GmbH
Johannes von Wenserski
Prokurist (holder of a general commercial power of attorney)
Gladbacher Strasse 23
52525 Heinsberg, Germany
Tel.: +49 (0)2452 96491-0
Email: info@edgetech-europe.com