August 25, 2022

Edgetech presents Super Spacer® T-Spacer™ SG at glasstec 2022


Warm edge spacer system for structural glazing and XXL glass panes
Super Spacer® T-Spacer™ SG was developed for structural glazing and XXL glass panes in order to optimise the durability properties of the edge seal. Here the typical T-shape of the warm edge spacer has been specially adapted to the requirements of automated insulating glass lines for large formats.
Structural Glazing is is more than a fashion trend. Thanks to its excellent performance in terms of thermal insulation and life cycle costs, the elegant, translucent facade designs are a growing trend where sustainable building is concerned.

The primary seal is of particular importance in structural glazing due to the fact the UV-resistant silicone secondary sealants are gas permeable. The primary sealant - usually polyisobutylene - extruded onto the sides of the spacer and bonded to the inside of the glass pane bears the main load of keeping the edge seal gas-tight throughout and preventing vapour diffusion into the space between the panes. Super Spacer® T-Spacer™ SG, the new spacer for structural glazing and XXL glass panes, has larger surfaces for the application of the primary seal.
The outer dimensions remain unchanged compared to Super Spacer® T-Spacer™ Premium Plus, but the manufacturer increased the lateral areas in order to apply the polyisobutylene. The new spacer design also assists the application to be precise right down to the last millimetre of the spacer before the secondary seal is applied on the automated insulating glass line. This means that the parallelism and low tolerances of the spacers in large multi-pane insulating glass units are even more precise and the robustness of the system is further increased. This is particularly important where high pane dimensions and pane weights are involved, alongside the expected long service life of facade elements.


As with all products manufactured by Edgetech, Super Spacer® T-Spacer™ SG is a metal-free, silicone-based warm edge spacer made of structural foam with an integrated desiccant. It also offers excellent thermal insulation properties by virtue of its low thermal conductivity of 0.19 W/mK. The spacer’s composition offers enhanced shape memory which is very important for the long-term integrity of the edge compound. The elastic structural foam follows the climate-related movements of the glass, relieving a large proportion of the load from the butyl seal. This represents an invaluable advantage especially in climate zones with very low, very high or strongly fluctuating temperatures.
Edgetech at glasstec: Hall 17, Booth C 57
About Edgetech Europe GmbH, A Part of Something BiggerSM
Edgetech Europe GmbH, located in Heinsberg, Germany, is a fully owned subsidiary of Quanex Building Products Corporation, (NYSE: NX) a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. Edgetech Europe GmbH services markets in continental Europe with a total of 490 employees and 17 extruders. We are “A Part of Something Bigger” by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, and giving back to communities where we operate. Visit for more information.

Press Agency
Interview International
Ingrid Hecht
15, rue Martin Luther
67000 Strasbourg, France
Tel: +33 (0)388.1555.88
Edgetech Europe GmbH
Charlotte Hawkes
Gladbacher Straße 23
52525 Heinsberg, Germany
Tel: +49 (0)2452.96491.0